Lumines

LED Labs PRO D 4PIN 10 mm LED strip connector with RGB socket, 24-0000-61

Name: LED Labs PRO D 4PIN 10 mm LED strip connector with RGB socket, 24-0000-61
Brand: Lumines

The LED Labs PRO D 24-0000-61 connects a 10 mm LED strip to an RGB socket. A 15 cm cable links the transparent strip clamp to the black socket. This is the four-pin version, not the alternative fitted with a round DC power socket.Check the strip and contact layoutThe manufacturer specifies RGB/CCT strips, a 4PIN connection and four conductors, each with a cross-section of 0.3 mm². Before choosing the connector, compare the strip width, number of contacts and connection layout with your installation. An RGB designation alone does not establish that both components have matching electrical connections.The connector supports 5, 12 or 24 V DC with a maximum current of 2 A. This is a current limit, not a power rating in watts. The documented body dimensions are 22 × 14 × 7 mm and should not be read as the overall length including the cable.A solder-free strip connectionPCB-piercing contacts make the connection without soldering. The manufacturer lists polycarbonate and copper as the connector materials. It permits use with IP20 and IP65 strips, but the joint must be sealed to maintain IP65. Closing the transparent clamp does not by itself establish a watertight connection.Näytä lisää

alk. 1,21 €

1 tarjous

Näytä tarjoukset