NORLYS

Bollard Light NORLYS Trysil 1102GR graphite LED 8 W 3000 K 85 cm DALI2

Name: Bollard Light NORLYS Trysil 1102GR graphite LED 8 W 3000 K 85 cm DALI2
Brand: NORLYS

Trysil 1102GR is an 85 cm LED bollard: a straight extruded-aluminium profile that bends at an angle near the top into a horizontal head shining downwards through a sealed clear PMMA lens. The body is powder-coated in graphite RAL 7016, a dark anthracite grey. The LED module and driver are built in, so no lamp is needed.Dimensions and mountingThe shaft has a 110 × 50 mm cross-section and the head reaches out 340 mm, so the bollard takes up a 34 × 11 cm footprint. It is fixed through four ø8 mm holes at 18 × 50 mm spacing; for installation in the ground there is the concrete-in anchor 1907ZX0009, sold separately like the other accessories. The luminaire weighs 4.2 kg and ships in a 39.5 × 13 × 94.5 cm carton.What light it givesThe Cree LED module is rated 5.8 W and 828 lm; 689 lm leaves the luminaire at 8 W, i.e. 86.1 lm/W. The Ledil VSM lens gives an IESNA Type V distribution, symmetrical and wide, so the light spreads all around the bollard, and ULOR 0% means none of it goes up into the sky. 3000 K is a warm white, CRI 80 is typical for area lighting, and SDCM 3 keeps several bollards along a path in the same shade of white.Control and wiringThe electronic driver works in a DALI-2/TD system: the bollard is switched and dimmed from a DALI controller, not a phase dimmer, which has to be planned into the installation. The terminals take conductors up to 5 × 2.5 mm² and loop-through wiring up to 5 × 1.5 mm², so one line can feed several bollards. With an inrush current of 5 A for 220 µs, Norlys allows up to 82 luminaires on a B10 breaker and up to 130 on a B16. The luminaire is protection class I and must be connected to a protective earth; installation is for a qualified electrician.Durability, service and intended useIP65 lets the bollard stand unprotected in rain and snow, and IK08 means resistance to an impact of 5 J. It operates from −20 to +45 °C, and its light source is in energy efficiency class F. The LED module keeps 90% of its flux after 109,000 h, and the driver is rated for 100,000 h. A professional service replaces the LED source, while the control gear can be replaced by the user; the spare part is repair kit ZS1102zx0009.Norlys designed Trysil for gardens, private grounds and architectural projects, for example along a driveway, on a hotel terrace or in front of a restaurant. The angular form without ornament suits modern, minimalist architecture.Näytä lisää

alk. 519,19 €

1 tarjous

Näytä tarjoukset